4
Part. 14000101 Rev. 12/2019
®/™ ©2019 Unity Laundry Systems. All rights reserved.
NOTE: The WARNINGS and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not meant to cover
all possible conditions and situations that may occur. Common sense, caution and care must be exercised when
installing, maintaining, or operating the washer.
WARNING
Machine installations must comply with minimum specications
and requirements stated in the applicable Installation Manual, any
applicable municipal building codes, water supply requirements,
electrical wiring regulations and any other relevant statutory
regulations. Due to varied requirements and applicable local codes,
this machine must be installed, adjusted, and serviced by qualied
maintenance personnel familiar with applicable local codes and the
construction and operation of this type of machinery. They must also
be familiar with the potential hazards involved. Failure to observe
this warning may result in personal injury, property damage, and/or
equipment damage, and will void the warranty.
IMPORTANT: Ensure that the machine is installed on a level oor of sufcient strength. Ensure that the recommended
clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be
blocked.
0.3 SAFETY DECALS
Safety decals appear at crucial locations on the machine. Failure to maintain legible safety decals could result in injury to the
operator or service technician.
Use manufacturer-authorized spare parts to avoid safety hazards.
00 SAFETY INFORMATION
ELECTRICAL RISK
Protection guard for electric components.
MECHANICAL RISK
Protection guard for moving parts.
FLAME RISK (only on some machines)
Protectiveguardforame.
ACCESS PROHIBITED
HIGH TEMPERATURE RISK
Operate with caution.
Use appropriate protections.
RISK OF INHALING HARMFUL OR
IRRITANT VAPORS
Keep the doors/covers closed.
Use appropriate protection.
RISK OF FALLING
Use proper access and safety methods.
To Next Page
Loading...
Need help?
General
