UNITY LAUNDRY SYSTEMS UTS62 Installation And Maintenance Instructions

24
Part. 14000101 Rev. 12/2019
®/™ ©2019 Unity Laundry Systems. All rights reserved.
06 MAINTENANCE
End of Day
1. Clean the door gasket of residual detergent and all foreign matter.
2. Clean the door glass with a damp cloth.
3. Clean automatic supply dispenser lid and general area.
4. Cleanthemachine’stop,frontandsidepanelswithmilddetergent.Rinsewithcleanwater.DONOTuseproductsthat
contain alcohol on the control panel.
5. Inspect and clean basket.
6. Clean lint inside of the machine weekly or more frequently as needed [where applicable].
NOTE: Unload the machine promptly after each completed cycle to prevent moisture buildup. Leave leading door
open after each completed cycle to allow moisture to evaporate.
6.3 WEEKLY
1. Check the machine for leaks.
a.Startanunloadedcycletollthemachine.
b. Verify that door and door gasket do not leak.
c. Verify that the drain valve is operating and that the drain system is free from obstruction. If water does not drain out during
therstwashsegment,thedrainvalveisclosedandfunctioningproperly.
2. Clean lint inside of the machine weekly or more frequently as needed [where applicable].
3. On machines equipped with an automatic chemical supply system, check chemical connections by inspecting all
connections and chemical hoses for leaks or cracks.
IMPORTANT: Chemical leaks can quickly cause permanent damage to the machine components and structure.

UNITY LAUNDRY SYSTEMS UTS62 Specifications

General

Brand	UNITY LAUNDRY SYSTEMS
Model	UTS62
Category	Laundry Appliance
Language	English