Universal Remote Control R7 User Manual

The R7 Remote Control
STEP 6: After you’ve entered the code number and the
component has turned off, press the POWER button on your
remote to turn the component back on.
Now it’s time to test the VOLUME and CHANNEL buttons (or
PLAY and STOP buttons for VCR and DVD) to make sure they
all work. For example, maybe your Sony TV turned off with
code number 147, but the volume controls did not work
properly. If this is the case, try the next code number listed for
that component and repeat STEP 5 using the next code
number until you find a perfect match.
STEP 7: Once you have found a correct code, you just have to
save it. Press the component button you just programmed, (in
this case TV), one more time to store the code number. The
component button LED light will blink three times to confirm
that the code was successfully stored. Now when you press
the TV component button, all the buttons will work with your
TV.
NOW, PROGRAM THE REST OF YOUR COMPONENTS BY
REPEATING STEPS 3 THROUGH 7.
IMPORTANT: If the Pre-Programmed Code Method did not
work for you, try the Auto-Search Method next as outlined on
page 12.

Universal Remote Control R7 Specifications

General

Brand	Universal Remote Control
Model	R7
Category	Remote Control
Language	English