Universal Remote Control URC-A6 User Manual

Page | 32
Factory Reset
You can reset your URC-A6 remote to the
original factory default settings.
Press and hold both the [TV] and RECORD
[REC] buttons for about five seconds until the
[CABLE/SAT] Component light blinks five
times. All programming and set-up codes
that you have entered into the remote will be
erased and the URC-A6 will return to the
original factory default settings.
Warning
This procedure will erase all programming
and set-up codes that you have entered into
the remote.
Replace
with
high
quality
image

Universal Remote Control URC-A6 Specifications

General

Brand	Universal Remote Control
Model	URC-A6
Category	Remote Control
Language	English