Stand 17.9.2024
45 von 138
DE
EN
FR
NL
IT
ES
PL
5. Please note that, after a short time, a patina (i.e. a coating) may cover the
baking chamber. This patina does not affect the way the appliance operates
and is therefore not a cause for complaint.
6. Wipe the inside and outside of the appliance down with a damp cloth with
a little washing-up liquid and wipe again with a cloth dampened with clear
water. Do not allow water to enter the appliance. Then dry the appliance
thoroughly.
7. Note: Some condensation may occasionally form behind the glass of the door.
This is due to technical reasons and not a cause for complaint. As a rule,
this water evaporates after further baking processes at a high temperature.
8. Regular cleaning prolongs the service life of your appliance.
9. When not in use, store the appliance in a dry, dustproof place. If you are not
going to use the appliance for a long period of time, we recommend that you
store it in the original box.
ERROR INDICATIONS ON THE DISPLAY
Error display
and error codes
Cause of error
No display or code
on the control
panel
The appliance is not connected to the power supply.
Circuit board damaged - contact customer service.
Overheating protection fuse switched off - let the
appliance cool down.
The display is
active, but the unit
does not heat up.
Upper or lower heating element damaged.
Damaged relay components on the circuit board.
Contact the customer service.
E1
Upper temperature sensor interrupted.
Contact the customer service.
E2
Lower temperature sensor interrupted
Contact the customer service.
E3
Indoor temperature not detected.
Contact the customer service.
E4
Indoor temperature not detected.
Contact the customer service.
E5
A communication line in the electronics is defective.
Contact the customer service.
Copyright UNOLD AG | www.unold.de
To Next Page
