6. STEAM.Maxi™ Water Inlet
Checking the water quality
- To produce steam using the
STEAM.Maxi technology ChefTop and
BakerTop ovens have to be connected
to the water supply.
- Before connecting the water pipe to
the appliance please let some water
flow to clear the pipe of any
obstructions that can damage the
water valves inside the STEAM.Maxi
circuit.
- Verify water hardness:
- It’s value shouldn’t be higher than
100µS/cm.
- If the value is higher, it’s
mandatory to use a proper water
purifier.
- It is possible that some iron powders
are disolved in the water and they can
create the formation of rust in the
cooking chamber. The only system to
remove these powders from the water
are reverse osmosis membranes.
- It is reccomended to use osmotic
membranes filter in order to avoid
limestone and/or other minerals
depositing inside the oven and grant
the maximum durability of the unit
itself.
Poor water quality effect
Water in connection
20
To Next Page
Loading...
Need help?
General