• select a preset cooking program for the new step;
• edit the preset program as required.
Preheating
Before doing any cooking, it is very important to preheat the oven
cavity correctly to temperature: therefore, when each cooking
cycle starts, the oven is automatically preheated.
UNOX recommends that you use SMART.Preheating, an automatic
preheating program that autonomously sets the preheating time
and temperature; it also takes into account the dispersion of heat
when you open the door and is activated when the oven moves
from one step to the next, adjusting the oven cavity to the step’s
new parameters.
To Next Page
Loading...
Need help?
General