Unox XBC - Substructure Anchoring and Stacking

Positioning: substructures
Before anchoring on a UNOX substructure or on one of your own, always check that the
substructure is perfectly flat using a spirit or digital level. If otherwise, the UNOX
substructure can be levelled by acting on the feet, making sure to avoid completely
unscrewing them.
Anchoring on user's substructure (i.e. steel tables, etc...)
5
x8
6
7
x4
2
3
4
x8
OK!
1
Anchoring on UNOX substructures
(UNOX - provers, blast-coolers, or neutral cabinets/ Pollo )
1
2
3
5
x4
x8
4
BakerTop
™
ChefTop
™
English
19