Need help?Do you have a question about the Uplift Desk E7 Electric and is the answer not in the manual?
Position base upside down, place felt pads at corners, then flip over.
Attach lifting column to base and worksurface bracket to column.
Connect lifting column, control box, keypad, and power cable to outlet.
Feed keypad wire, attach worksurface to bracket using screws.
Attach keyboard tray bracket and keyboard tray to worksurface.
Group wires with cable clips to prevent interference during operation.
Slide housing over lifting column and secure with screws.
Attach VESA bracket to column, monitor to mount, and secure.
Calibrate the desk height to match the actual worksurface height.
Lock and unlock the keypad to prevent accidental activation.
Save and recall up to two commonly used desk heights.
Change between one-touch or continuous touch operation.
Adjust the upper and lower height limits of the desk.
Change the display unit for height measurements.
Step-by-step guide to reset the desk unit for operational issues.
Solutions for common error codes like HO1, E01, E07.
Important safety precautions and warnings for usage and handling.
General| Weight Capacity | 355 lbs |
|---|---|
| Frame Material | Steel |
| Motor Type | Dual motor |
| Adjustment Speed | 1.5" per second |
| Control Type | Digital display with memory presets |
| Warranty | 15 years |
| Noise Level | 50 dB |
| Desktop Thickness | 1" |
To Next Page
