Uplink 4530 - Device Activation Process

4G PRIMARY
ALARM COMMUNICATOR
20
INSTALLATION (cont.)
F. Activating the 4530
The 4530 is programmed OTA (Over-the-Air) by accessing the Uplink Dealer website or
by calling Uplink Customer Service at 1-888-9UPLINK (1-888-987-5465).
New Dealer Enrollment:
Fornewdealers/customers,youmustrstestablishanaccountwithUplinkby
visiting the Uplink website (www.uplink.com).
1. Enter the Login Name and Password. Wait about 20 seconds for the next web
page to completely load.
2. Select “Activate Unit” from the menu choices.
3. Answer “Yes” to the question “I have read and I accept the terms of the Activation
Agreement”.
4. Enter the device serial number and select “Activate”.
5. Enter all appropriate customer information.
6. From the Central Station Notication drop down menu, select the appropriate
format.
7. Enter the appropriate Central Station phone number and account number.
 8.Congurethedevicetomeetyourinstallneeds.
9. Select “Update”.
10. From the “Programming” drop down menu, select “Program Unit Over the Air”.
11. Set the appropriate Dialer Protocol, select Send.
12. From the “Test” drop down menu, select “Send Status Request Signal”.
13. Activation is complete once a successful test message is displayed. From the
“Signal History” drop down menu, select “Events Received”.
(INSTALLATION continued next page)