How to stop unfamiliar noise from the pump at the same time and day of the week in Uponor T-75 Control Systems?
If you hear an unfamiliar noise from the pump at the same time and day of the week with your Uponor Control Systems, change the time for pump exercise.
What does signal 1, 2 mean on Uponor T-75?
If the Uponor Control Systems thermostat displays signal 1 or 2 from a single thermostat, the thermostat or antenna may not be in the correct position. Try reducing the distance between the thermostat and the base unit.
What to do if no radio transmission icon displayed on Uponor T-75 thermostat screen when +/- keys pressed?
If the Uponor Control Systems thermostat does not display a radio transmission icon when the +/- keys are pressed, the transmitter in the thermostat may be broken. Force the thermostat to transmit by changing the temperature setpoint.
General| Brand | Uponor |
|---|---|
| Model | T-75 |
| Category | Control Systems |
| Language | English |
Key safety precautions to follow during installation and operation of the system.
Details on the required power supply specifications for the zoning system.
Details on the base unit, its antenna, and actuator capabilities.
Essential steps and checks before beginning the base unit installation process.
Instructions for mounting the base unit antenna using screws or adhesive.
Step-by-step process for pairing thermostats with base unit channels.
Recommendations for optimal thermostat placement and mounting methods.
Procedure to test wireless communication between thermostats and the base unit.
Detailed steps for wiring and initial programming of the interface.
How to adjust temperature format, setpoints, and min/max limits.
How to identify and resolve alarms indicated by LEDs and interface messages.
Common causes for errors related to the base unit and thermostats.
To Next Page
