DS1093-520 47
3.6.1.4 S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) information
This page can be used to control the S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) functions of the
hard disks connected to the DVR.
Self-Monitoring, Analysis, and Reporting Technology or S.M.A.R.T. is a hard drive and SSD monitoring system for
detecting and providing reliability indicators with the goal of anticipating faults.
• Whole Evaluation not passed, continue to use the disk: if selected, this indicates that the HDD was not
completely analysed but the system can still use it.
• ID Hard Disk: Identification of the HDD (set by system).
• Self-check Type: select the type of analysis to be performed on the HDD; possible values are: Short, Whole.
• Self-check State: this indicates the check state performed on the disc (if run).
• TEMP (°C): Temperature of the HDD.
• Utility Time (d): Time of use (in days).
• Whole Evaluation: Result of the complete analysis of the HDD; possible values are: PASSED, NOT PASSED.
• S.M.A.R.T. Info: list of information provided by the S.M.A.R.T. system and respective results with respective
reference values. The information is mainly for use by expert personnel.
To Next Page
Loading...
Need help?
General
