USR-N540 User Manual www.usriot.com
Jinan USR IOT Technology Limited 36 / 73 inquiry@usriot.com
③ Open modbus slave software, choose the serial port which connected with USR-N540. Run modbus Poll
software and make port-forwarding with this serial port.
④ The value of modbus poll will also be changed when you revise the value of modbus slave.
2. Conduct Modbus Polling through Modbus TCP to Modbus RTU
① Set USR-N540 via software, select Modbus TCP
To Next Page
Loading...
Need help?
General
