Need help?Do you have a question about the USR IOT USR-WIFI232-630 and is the answer not in the manual?
Connect the serial port to WIFI/Ethernet for communication testing.
Connecting to the default network name (SSID) of the Convert Server.
Perform serial and network transmission tests using USR-TCP232-Test software.
Details on hardware flow control, indicator lights, and interface pins.
Specifications including certification, wireless standards, frequency range, and transmit power.
List of items included in the Convert Server package.
Diagram showing the physical dimensions of the Convert Server.
Description of the function and meaning of each indicator light on the device.
Details on RS232, RS485, and RJ45 interfaces, including pinouts.
Using Convert Server as an Access Point for connecting other devices.
Connecting Convert Server to an existing AP to form a wireless network.
Configuring Convert Server to operate as both AP and STA simultaneously.
Steps for configuring network, TCP/UDP, and serial port parameters.
Overview of available operating modes: Transparent, Serial Command, GPIO, HTTPD Client.
Enables plug-and-play serial data transmission without complexity.
Sending serial data to specific server addresses using UDP or TCP client.
Configuring the Convert Server through its built-in webpage.
Accessing the Convert Server's web interface using default credentials.
Rapid configuration of key parameters through the Quick Configure page.
Selecting the wireless networking mode (AP/STA) and data transmission mode.
Configuring wireless and LAN settings when the Convert Server operates as an AP.
Configuring STA parameters for connecting to surrounding APs.
Steps to configure two servers for transparent serial port communication using TCP protocol.
Configuring LAN and WAN IP addresses for the Convert Server via the web page.
Steps to configure two servers for transparent serial port communication using UDP protocol.
Configuring the network protocol (TCP Server/Client, UDP) and port settings.
Configuring multiple servers as STA to connect to an AP.
Methods to prevent IP address conflicts in mixed dynamic/static IP applications.
Configuring PC as server and Convert Servers for data acquisition.
Information on UDP multicast support and IP range limitations.
Procedure for finding the Convert Server's IP address when operating in STA mode.
Using servers in AP+STA mode to join a router and extend wireless coverage.
Legal disclaimer regarding intellectual property rights and product warranties.
To Next Page
General
