Convert Server User Manual www.usriot.com
Jinan USR IOT Technology Limited 30 / 44 tec@usr.cn
Such as SSID of AP which Convert Server need to connected, and also select the networking type: DHCP or
static IP address.
Attention:This page has three STA settings, you can refer to fill one can also fill multiple, if fill in multiple, when
connecting the current network signal is less than critical value when the signal, automatically switch to the
next STA network (if only to fill a, please fill out the critical value is 100, otherwise it will the broken network).
This page use to setting the parameters of serial port communication, such as UART setting,UART
AutoFrame Setting,Ethernet function,Device ID setting and high layer network protocol setting which used
support serial communication.
To Next Page
Loading...
