Convert Server User Manual www.usriot.com
Jinan USR IOT Technology Limited 15 / 44 tec@usr.cn
4.5. Ethernet bridge connection(WIFI works in AP mode)
Figure 11 Ethernet bridge connection
USR-WIFI232-630 wireless configured for AP mode,Turn off the DHCP server of module,And IP will revise
the router with a network segment (in the page of "AP Interface Setting" there is a corresponding option)After
the completion of installation,2RJ45 of serial server connected to the router,1RJ45 of serial server connected
computer.So, computer, serial server, router in the same network.Serial server is equivalent to a switch bridge
router and computer.
Which uses the AT command includes the following:
AT+WAP Set to the router SSID
AT+WAKEY Set to the router password
AT+LANN Set the ip of itself with routers in the same segment IP
AT+DHCPDEN=off Turn off the serial port server DHCP function
Application and setting process with AT instructions, please refer to the specificdocument "USR-WIFI232-
D2_en" AT instruction section.
To Next Page
Loading...
