Convert Server User Manual www.usriot.com
Jinan USR IOT Technology Limited 42 / 44 tec@usr.cn
2. After the Convert Server receives a password, if the password is correct, to the address (Unicast, Port:
48899) sends local IP address and MAC address and name of the Convert Server. (IP, MAC, MID as
10.10.100.254,888 B5D0000E2, guxin).
So you can get to the IP address of the Convert Server.
Q10:Servers use wireless switch
1、The module is opened in AP+STA mode: AT commands to send AT+FAPSTA=on and AT+FVER=z to the
module, received the correct response, restore factory settings.
2、Module Will join the router ,Webpage settings page as follows:
To Next Page
Loading...
