USR IOT USR-TCP232-306 - Features; Identity Packet Function

USR-TCP232-306 User Manual Technical Support: h.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
16
2.4. Features
2.4.1. Identity Packet Function
Figure 17 Identity Packet application diagram
Identity packet is used for identify the device when module works as TCP client/UDP client. There are two sending
methods for identity packet.
 Identity data will be sent when connection is established.
 Identity data will be add on the front of every data packet.
Identity packet can be MAC address or user editable data (User editable data at most 40 bytes). User can set
TCP232-306 with Identity Packet function by web server as follow:
Figure 18 Identity Packet