USR IOT USR-TCP232-306 - Non-Persistent Connection; Timeout Reset Function

USR-TCP232-306 User Manual Technical Support: h.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
20
2.4.7. Non-persistent Connection
TCP232-306 support non-persistent connection function in TCP Client mode. When TCP232-306 adopt this
function, TCP232-306 will connect to server and send data after receiving data from serial port side and will
disconnect to server after sending all the data to server and no data from serial port side or network side over a
fixed time. This fixed time can be 2~255s, default is 3s. User can set TCP232-306 with non-persistent connection
function by web server as follow:
Figure 23 Non-persistent Connection
2.4.8. Timeout Reset function
Timeout reset function(no data reset): If network side no data transmission beyond a fixed time(User can set this
fixed time between 60~65535s, default is 3600s. If user set a time less than 60s, this function will be disable), 306
will reset. User can set the Timeout Reset function by web server as follow:
Figure 24 Timeout Reset function