3. Parameter Setting
There are three ways to configure USR-TCP232-306. They are setup software configuration, web server
configuration and AT command configuration.
3.1. Setup software Configuration
User can download setup software from http://www.usriot.com/usr-m0-setup-software/. When user want to
configure the TCP232-306 by setup software, user can run setup software, search TCP232-306 in same LAN and
configure the TCP232-306 as follow:
Figure 25 Setup software
After researching TCP232-306 and clicking TCP232-306 to configure, user need log in with user name and
password. Default user name and password both are admin. If user keep the default parameters, it is not
necessary to log in.
3.2. Web Server Configuration
User can connect PC to TCP232-306 through LAN port and enter web server to configure.
Web server default parameters as follow:
To Next Page
Loading...
