15
PARALLEL OPERATION OUTLETS
ECO-THROTTLE SWITCH
ON:
OFF:
OOFFFF
PARALLEL OPERATION OUTLETS
OONN
ECO-THROTTLE SWITCH
The Eco-Throttle system automatically reduces engine speed when
all loads are turned off or disconnected. When appliances are turned
on or reconnected, the engine returns to the proper speed to power
the electrical load.
If high electrical loads are connected simultaneously, turn the Eco-
Throttle switch to the OFF position to reduce voltage changes.
When using the DC output, turn the Eco-Throttle switch to the OFF
position.
Recommended to minimize fuel consumption and further
reduce noise levels when no load is applied to the generator.
The Eco-Throttle system does not operate.
These outlets are used for connecting two generators for
parallel operation (see page ). A USR approved parallel operation
kit (optional equipment) is required for parallel operation. This kit can
be purchased from an authorized USR generator dealer.
23