23
AC PARALLEL OPERATION
PARALLEL OPERATION KIT
(optional equipment)
Connect the parallel operation kit between the two
generators following the instructions supplied with the kit.
If the generators are overloaded (see page ), or if there is a short
circuit in a connected appliance, the overload indicator lights (red) will
go ON. The overload indicator lights (red) will stay ON, and after about
four seconds, current to the connected appliance(s) will shut off, and
the output indicator lights (green) will go OFF. Stop the engines and
investigate the problem.
Most motorized appliances require more than their rated wattage for
startup.
Plug in the appliance following the instructions provided with the
parallel operation kit.
Start the generators and make sure the output indicator lights
(green) come on (see page ).
1.
2.
3.
33
22
To Next Page
Loading...
Need help?
General