USTM WS-20-LCD-CLARO - Technical Parameters

9" / 35"
310 x 500 x 1100 mm
3,5 kg
25 l
180 l
1,2 (m/h)
40 kg
220-240 V / 50-60Hz, 12V (1,5A)
3 bar – 5,5 bar (rec. 4 bar)
8W ( )only during regeneration
1 - 30C
1"
4 - 30C
WS-25-LCD-CLARO
71 dH x m
10
Table of contents
1. Technical parameters
2. General information
3. Start-up instructions
4. Soener components
5. Soener installation
6. Programming
6.1. Button definition
6.2. Programming
7. Start-up procedure
8. Adjustng treated water hardness
9. Maintenance
10. Troubleshooting
...................................... 12
...................................... 13
...................................... 14
...................................... 14
...................................... 14
...................................... 16
...................................... 16
...................................... 18
...................................... 20
...................................... 20
...................................... 21
...................................... 21
EN
1. Technical parameters
8" / 35"
310 x 500 x 1100 mm
3 kg
20 l
170 l
1,2 (m/h)
34,5 kg
220-240 V / 50-0Hz, 12V (1,5A)
2,6 bar – 5,5 bar (rec. 4 bar)
8W (only during regeneration)
1 - 30C
1"
4 - 30C
symbol
ion-exchange capacity
water consumption for regeneration
at 2,6 bar pressure
average salt consumption
per regeneration
dimensions
width / depth / height
pressure vessel size diameter / heigth
weight
working pressure
WS-20-LCD-CLARO
57 dH x m
8 min
6 min
backwash
8 min
8 min
rinse
10 min
8 min
refil
60 min
50 min
brine
nominal flow
resin volume
power supply, voltage
power consumption
ambient temperature
connection
feedwater temperature
Compact soeners are certified by NIH (National Institute of Hygiene). The certificate allows the device to come into
contact with drinking water.