Utax CD 1030 User Manual

Section 7 COPIER MANAGEMENT FUNCTIONS
7-34
● Default copy limit
Perform the following procedure when you want to change the default
copy limit for new department ID-codes.
1
Select “Def. Val. of coun. limit” under the “Setting item”
column on the left side of the touch panel and then touch the
“Change #” key.
The “Def. Val. of coun. limit” screen will be displayed.
Inch specifications
Close
Change #
ValueSetting item
Default setting - Management code menu - Managem. Def. Set.
Managem. Def. Set.
Scanner Managem.
Fax Management
On
On
Excess of limit Setting Unable to use
Def. Val. of coun. limit 999999
Total size 1
8
1
/ 2x11" No specif.
Total size 2
8
1
/ 2x11" No specif.
Total size 3 8
1
/ 2x11" No specif.
Metric specifications
Close
Change #
ValueSetting item
Default setting - Management code menu - Managem. Def. Set.
Managem. Def. Set.
Scanner Managem.
Fax Management
On
On
Excess of limit Setting You cannot use
Def. Val. of coun. limit 999999
Total size 1
A3 No specif.
Total size 2
B4 No specif.
Total size 3 A4 No specif.
2
Use the numeric keys on the keypad to enter the default copy
limit. The limit can be set to any 1-page increment up to
999,999.
Inch specifications
CloseBack
Def. Val. of coun. limit
Default setting - Management code menu - Managem. Def. set.
Default value of counter limit can be set.
Clear
999,999
(1~999,999)
Limited value
Metric specifications
CloseBack
Def. Val. of coun. Limit
Default setting - Management code menu - Managem. Def. set.
Default value of counter limit can be set.
Clear
999,999
(1~999,999)
Limited value
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 1.
3
Touch the “Close” key.
The touch panel will return to the screen in step 1.

Utax CD 1030 Specifications

General

Brand	Utax
Model	CD 1030
Category	All in One Printer
Language	English