Section 5 OTHER CONVENIENT FUNCTIONS
5-41
9
Once the test copy set is complete, a screen will be
displayed in order to verify whether or not you want to make
the initially designated number of copy sets at the present
settings, and the copier will enter a waiting-to-copy state.
Check the test copies.
Inch specifications
Change
Preset
Cancel
Orig. page
Count/Set
Check proof copy.
To stop and retry, press "Cancel" key.
To continue to print, press "Start" key.
2 sided
Sort Inner tray
100%
APS
Output
Rear
1 sided
Job130
11x8
1
/
2
"
11x8
1
/
2
"
Metric specifications
Change
Preset
Cancel
Original Count / set
Check test copy.
To stop and retry , press "Cancel" key.
To continue to print, press "Start" key.
2-sided
Sort
100%
APS
Output
Rtop/Rear
1-sided
JOB130
A4
A4
Inner tray
● If there is no problem with the copies…
Press the [Start] key and copying of the initially designated
number of copy sets will start.
If you want to change the number of copies to be made,
touch the “Change Preset” key and enter the actual number
of copies you do want to make.
● If there is some problem with the copies…
Touch the “Cancel” key to cancel the copy job and start the
procedure from the beginning.
To Next Page
Loading...
Need help?
General
