2HL/2HM/2HN
1-4-27
(15) Fusing is loose.
(16) Colors are printed offset to each other.
Print example Causes Check procedures/corrective measures
Wrong types of paper. Check if the paper meets specifications, replace paper.
Flawed heat roller or press roller. Replace the heat roller and press roller (See page 1-5-26).
Print example Causes Check procedures/corrective measures
Defective calibration. Perform the color calibration (Refer to operation guide).
Slip the mirror position of laser scan-
ner unit.
Perform the color registration. When the problem is not
cleared, perform the manual color registration adjustment
(Refer to operation guide).
To Next Page
Loading...
