Utax P-3025 MFP

3
3-29
Basic Operation
Checking Remaining Toner and Paper
You can check the remaining amount of toner and that of paper in each feeder cassette.
Checking Remaining Toner
1 Press the Status/Job Cancel key. The Status menu
appears.
2 Press the  or  key to select [Toner Status].
3 Press the OK key. Toner Status appears.
The remaining amount of toner is displayed in one of 10
levels.
Checking Remaining Paper
1 Press the Status/Job Cancel key. The Status menu
appears.
2 Press the  or  key to select [Paper Status].
3 Press the OK key. Paper Status appears.
Press the  or  key to switch the display of remaining
paper amount among the main unit cassette, optional
cassette (if installed) and MP tray.
Status: a b
*********************
2 Send Job Status
3 Store Job Status
[ Pause ]
1 Print Job Status
Toner Status: b
0%
VVVVEEEEEE 100%
Status: a b
*********************
2 Send Job Status
3 Store Job Status
[ Pause ]
1 Print Job Status
Paper Status: C b
Cassette 1: 1/ 4
Letter
a Empty
Plain