7-20
Status / Job Cancel
Device/Communication
Configure the devices/lines installed or connected to this machine or check their status. You can also control devices
depending on their status.
Check of Device Status
1 Press the Status/Job Cancel key. The Status menu
appears.
2 Press the or key to select [Scanner], [Printer] or
[FAX].
3 Press the OK key. This displays the status of the device
selected in step 2.
4 Press the OK key. The screen returns to the Status
menu.
The items you can check are described below.
Scanner
The information (scanning, pausing, etc.) is displayed.
Printer
Information (waiting, printing, etc.) is displayed.
FAX
The information (sending, waiting, etc.) is displayed.
To Next Page
Loading...
