Utax P-3025 MFP

8
8-27
Default Setting (System Menu)
Date/Timer
Date/Timer settings include:
• Date/Time …8-27
• Date Format …8-29
• Time Zone …8-30
• Summer Time …8-31
• Auto Error Clear …8-32
• Low Power Timer …8-35
• Sleep Rules (models for Europe) …8-36
• Sleep Level (models except for Europe) …8-37
• Sleep Timer …8-39
• Auto Panel Reset …8-40
• Unusable Time …8-43
NOTE: If user login administration is enabled, you can only change the settings by logging in with administrator
privileges.
Date/Time
Set the date and time for the location where you use the machine. If you perform Send as E-mail, the date and time
set here will be displayed on the header.
CAUTION: Be sure to set Time Zone before the Date/Time setup.
Use the procedure below to set the date and time.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language