8-48
Default Setting (System Menu)
6 Press the OK key. Orig.Image(Copy) appears.
7 Press the or key to select [Text+Photo], [Photo],
[Text] or [Light Text/Line].
8 Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Original Image (Send)
Set the default original document type for sending. The available default settings are shown below.
Use the procedure below to select the default quality setting for originals for sending.
1 In the Sys. Menu/Count. menu, press the or key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the or key to select [Function Default].
Item Description
Text+Photo Text and photos together.
Photo For photos taken with a camera.
Text Only text, no photos.
for OCR Image quality suitable for OCR software.
Light Text/Line Sharply renders pencil text and fine lines.
To Next Page
Loading...
