Utax P-3025 MFP

8-94
Default Setting (System Menu)
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [CR Action].
4 Press the OK key.
5 Press the  or  key to select [CR Only], [LF and CR]
or [Ignore CR].
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Job Name
Set whether the job name set in the printer driver is displayed.
Use the procedure below to specify a Job Name.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [Job Name].
4 Press the OK key. Job Name appears.
5 Press the  or  key to select [Off] or [On].
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
CR Action: a b
*********************
2 LF and CR
3 Ignore CR
1 *CR Only
Sys. Menu/Count.: a b
5 Common Settings
6 CoPy
*********************
[ Exit ]
7 Printer
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
Job Name.: a b
*********************
2 On
1 *Off