Utax P-3025 MFP

8
8-175
Default Setting (System Menu)
6 Press the OK key. USB Device appears.
7 Press the  or  key to select [Unblock] or [Block].
8 Press the OK key. Completed. is displayed and the
screen returns to the System menu.
USB Storage
This locks and protects the USB interface connector (USB Storage). The default setting is Unblock.
Use the procedure below to specify the USB Host setting.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [I/F Block Set.].
4 Press the OK key. The I/F Block Set. menu appears.
5 Press the  or  key to select [USB Storage].
USB Device: a b
*********************
2 Block
1 *Unblock
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
I/F Block Set.: a b
*********************
2 USB Device
3 USB Storage
[ Exit ]
1 USB Host