Utax P-3025 MFP

11-18
Management
AccountingAccess
Set the job accounting access. Use the procedure below to specify the job accounting access setting.
1 Press the System Menu/Counter key on the main unit
operation panel.
2 Press the  or  key to select [User/Job Account].
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
NOTE: Refer to Character Entry Method on Appendix-5 for
details on entering characters.
3 The User/Job Account menu appears.
4 Press the  or  key to select [Job Account. Set.].
5 Press the OK key. The Job Account. Set. menu appears.
6 Press the  or  key to select [AccountingAccess].
7 Press the OK key. AccountingAccess appears.
8 Press the  or  key to select [Local] or[Network].
Sys. Menu/Count.: a b
*********************
5 User Property
6 Common Settings
[ Exit ]
4 User/Job Account
Login User Name: L b
*******************
Login Password:
[ Login ]
User/Job Account: a b
1 User Login Set.
*********************
3 Unknown ID Job
[ Exit ]
2 Job Account.Set.
Job Account.Set.: a b
*********************
2 AccountingAccess
3 Account. Report
[ Exit ]
1 Job Accounting
AccountingAccess: a b
*********************
2 Network
1 *Local