Utax P-3025 MFP

11-24
Management
2 Press the  or  key to select [User/Job Account].
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
NOTE: Refer to Character Entry Method on Appendix-5 for
details on entering characters.
3 The User/Job Account menu appears.
4 Press the  or  key to select [Job Account. Set.].
5 Press the OK key. The Job Account. Set. menu appears.
6 Press the  or  key to select [Default Setting].
7 Press the OK key. The Default Setting menu appears.
8 Press the  or  key to select [Copy/Print Count].
9 Press the OK key. Copy/Print Count appears.
10 Press the  or  key to select [Total] or [Split].
11 Press the OK key.
Completed. is displayed and the screen returns to the
Default Setting menu.
Sys. Menu/Count.: a b
*********************
5 User Property
6 Common Settings
[ Exit ]
4 User/Job Account
Login User Name: L b
*******************
Login Password:
[ Login ]
User/Job Account: a b
1 User Login Set.
*********************
3 Unknown ID Job
[ Exit ]
2 Job Account.Set.
Job Account.Set.: a b
*********************
2 AccountingAccess
3 Account. Report
[ Exit ]
1 Job Accounting
Default Setting: a b
*********************
2 Copy/Print Count
3 Counter Limit
[ Exit ]
1 Apply Limit
Copy/Print Count: a b
1 Total
*********************
2 *Split