Utax P-4030DN - Page 104

Operation Panel
4-44
4 Press [OK]. The KPDL Error Rpt. screen appears.
5 Press  or  to select whether error reports are printed.
6 Press [OK]. The error report print setting is set and the Emulation
menu reappears.
Alt. Emulation (Alternative Emulation for KPDL Emulation)
The KPDL (AUTO) emulation enables the printer to automatically change the emulation mode according to the data
received when printing.
1 In the Print Settings menu, press  or  to select Emulation.
2 Press [OK]. The Emulation menu screen appears.
3 Press  or  to select Alt. Emulation.
4 Press [OK]. The Alt. Emulation screen appears showing a list of
the available alternative emulations.
The available alternative emulations are as follows:
PCL6
IBM Proprinter
EPSON LQ-850
Line Printer
5 Press  or  to select the desired alternative emulation.
6 Press [OK]. The alternative emulation is set and the Emulation
menu reappears.
KPDL Error Rpt.: a b
********************-
2 On
1 *Off
IMPORTANT This setting only appears when KPDL(Auto) is selected for the emulation.
Emulation: a b
********************-
2 KPDL Error Rpt.
3 Alt. Emulation
[ Exit ]
1 Emulation Set.
Alt. Emulation: a b
********************-
2 IBM Proprinter
3 EPSON LQ-850
1 *PCL6