Operation Panel
4-114
3 Enter the port number using the numeric keys.
4 Press [OK]. The port number is registered and the Netwk Auth.
Set menu reappears.
Domain Name (Entering of Domain Name)
Enter the domain name for the authentication server.
1 In the Netwk Auth. Set menu, press or to select Domain
Name.
2 Press [OK]. The Domain Name screen appears.
3 Enter the domain name using the numeric keys.
4 Press [OK]. The domain name is registered and the Netwk Auth.
Set menu reappears.
NW User Property (Obtain the network user property)
This setting is to acquire user information from the LDAP server.
1 In the User Login Set. menu, press or to select NW User
Property.
2 Press [OK]. The NW User Property menu screen appears.
The options available in NW User Property are as follows:
• Off/On (Switching network user property acquisition On/Off)...4-
114
• Authenticat Type (Authenticat type setting)...4-115
Off/On (Switching network user property acquisition On/Off)
Set the NW User Property to On/Off.
1 In the NW User Property menu, press or to select Off/On.
Note If the port number is registered as a blank field, the
default port number will be enabled.
Note This setting is only displayed when NTLM or Kerberos has been set as the Server Type (Server type
selection) on page 4-113.
Note Up to 256 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
Note This setting is only displayed when Netwk Authentic. has been set as the Login Type (Enabling of User
Login Administration) on page 4-112 and NTLM or Kerberos has been set as the Server Type (Server type
selection) on page 4-113.
Note Authenticat Type is only displayed when
Kerberos has been set as the Server Type (Server type
selection) on page 4-113.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
