Utax P-4030DN - Page 192

Operation Panel
4-132
7 Press [OK]. The Login Password entry screen is displayed.
8 Enter the Login Password using the numeric keys then press [OK].
The login screen reappears.
9 Pressing [Login] ([Right Select]). If the entered Login User Name
and Login Password are correct, the Op Functions menu appears.
10 Press  or  to select the desired application.
11 Press [OK].
12 Press  or  to select License On.
13 Press [OK].
14 Press  or  to select Official.
Note The initial setting for the administrator's Login
Password is "Admin".
For details on entering characters, refer to Character Entry
Method on page A-2.
Note You can view detailed information on the selected
application by selecting Detail.
Note To use the application as a trial, select Trial and
press [OK]. The confirmation screen is displayed so press
[Yes] ([Left Select]).
Login Password: a b
*
ABC
[ Text ]
Login User Name: O b
Admin
Login Password:
/******************-
[ Login ]
●●●●●
Op Functions: a b
********************-
2 ID Card
3 UG-33
[ Exit ]
1 DATA SECURITY
DATA SECURITY: a b
********************-
2 Detail
1 License On
License On: a b
********************-
2 Trial
1 Official