Utax P-4530DN User Manual

Operation Panel
4-68
2 Press [OK]. The Encryption screen appears.
The following operations are possible:
• Data Encryption (Data Encryption setting)...4-68
• WEP Key (WEP Key settings)...4-68
• Preshared Key (Preshared Key settings)...4-69
Data Encryption (Data Encryption setting)
This sets the encryption method.
1 In the Encryption menu, press  or  to select Data
Encryption.
2 Press [OK]. The Data Encryption screen appears.
3 Press  or  to select the desired encryption method.
4 Press [OK]. The Encryption menu reappears.
WEP Key (WEP Key settings)
This registers the WEP Key.
1 In the Encryption menu, press  or  to select WEP Key.
2 Press [OK]. The WEP Key screen appears.
3 Press[Edit] ([Right Select]). The WEP Key entry screen appears.
4 Enter the WEP Key using the numeric keys.
5 Press [OK]. The Encryption menu reappears.
Note WEP Key is displayed when Netwk Authentic.
(Network Authentication setting) on page 4-67 is set to Open
or Shared.
Preshared Key is displayed when Netwk Authentic.
(Network Authentication setting) on page 4-67 is set to WPA-
PSK or WPA2-PSK.
Encryption: a b
********************-
2 WEP Key
[ Exit ]
1 Data Encryption
Note The encryption methods that can be selected vary
depending on the authentication method set in Netwk
Authentic. (Network Authentication setting) on page 4-67.
Disable or WEP can be selected when Open or Shared is
set.
TKIP, AES or Auto can be selected when WPA-PSK is set.
AES can be selected when WPA2-PSK is set.
Data Encryption: a b
********************-
2 WEP
1 *Disable
Note Up to 26 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
WEP Key: a b
-----
[ Edit ]
WEP Key: a b
*
S
ABC
[ Text ]

Utax P-4530DN Specifications

General

Brand	Utax
Model	P-4530DN
Category	Printer
Language	English