To Next Page

To Previous Page

4-107

Operation Panel

Data Security (Data Security setting)

This is to change the Security Password, initialize on optional SSD (HD-6) and sanitizing the stored data.

• SSD Initializ. (SSD Initialization setting)...4-107

• DataSanitization (Sanitizing the stored data)...4-109

1 In the Security menu, press  or  to select Data Security.

2 Press [OK]. The Data Security menu screen appears.

SSD Initializ. (SSD Initialization setting)

This is to change the Security Password and initialize on optional SSD (HD-6).

• SecurityPassword (Change the Security Password)...4-108

• Initialization (Initialize on optional SSD)...4-108

1 In the Data Security menu, press  or  to select SSD

Initializ..

2 Press [OK]. The SecurityPassword entry screen appears.

3 Enter the Security Password using the numeric keys.

4 Press [OK]. If the Security Password entered is correct, the SSD

Initializ. menu screen appears. If the Security Password

entered was not correct, Incorrect password is displayed and

the SecurityPassword screen reappears. Enter the correct

Security Password.

Note SSD Initializ. is displayed only when the optional Data Security Kit is installed on the printer.

Data Security:

********************-

DataSanitization

[ Exit ]

SSD Initializ.

Note The initial setting for the Security Password is

"000000". For details on entering characters, refer to

Character Entry Method on page A-2.

SecurityPassword:

ABC

[ Text ]

SSD Initializ.:

********************-

Initialization

[ Exit ]

Security Passwd

Utax P-4530DN User Manual

Other manuals for Utax P-4530DN