5-35
Operation on the Machine > Using a Custom Box
Printing Documents
The procedure for printing documents in a custom box is explained below.
1
Display the screen.
1 [Document Box/USB] key > [ā²] [ā¼] key > [Custom Box] > [OK] key
2 Select the box containing the document you want to print, and select the [OK] key.
2
Print the document.
1 Select the document you want to print, and select [Select].
A checkmark will be placed on the right of the selected file.
Select the checkmarked file and select [Select] again to cancel the selection.
2 Select the [OK] key.
To use the settings used at the time of printing (when the document was saved), select [ā²] [ā¼] key >
[Print] > [OK] key.
To change the print settings, select [ā²] [ā¼] key > [Print(ChangeSet)] > [OK] key.
If [Print] is selected, change the number of copies to print as necessary.
If [Print (ChangeSet)] is selected, change the print settings. For the features that can be selected,
refer to the following:
3 Press the [Start] key.
Printing of the selected document begins.
ā¢ If a custom box is protected by a password, enter the correct password.
ā¢Select [Menu] to perform the following operations.
- [Open]: Open the selected box.
- [Detail]: Display the details for the selected box.
- [Sort(No.)], [Sort(Name)]: Sort the boxes.
- [Search(No.)], [Search(Name)]: Search using the box number or the box name.
Select [Menu] to perform the following operations.
ā¢ [Select All]: Select all files.
ā¢ [Clear All]: Cancel all the file selections.
ā¢ [Search(Name)]: Search using a file name.
ā¢ [Detail]: Display the details for the selected file.
Custom Box (Printing) (page 6-6)
To Next Page
Loading...
Need help?
General
