Utax P-C3060 User Manual

8-27
Setup and Registration (System Menu) > System Menu
Item Description
Protocol Detail ―
NetBEUI Selects whether or not to receive documents using NetBEUI.
*1
Value: Off, On
*1 The setting will be changed after restarting the device or the network for the machine.
LPD Select whether or not to receive documents using LPD.
*1
Value: Off, On
SMTP Select whether or not to send e-mail using SMTP.
Value: Off, On
POP3 Select whether or not to receive e-mail using POP3.
Value: Off, On
FTP(Client) Select whether or not to send documents using FTP. When selecting [On], set the FTP Port
Number. Use the FTP default port 21.
Value: Off, On (Port Number: 1-65535)
FTP(Server) Select whether or not to receive documents using FTP.
*1
Value: Off, On
SMB Select whether or not to send documents using SMB.
Value: Off, On (Port Number: 1-65535)
LDAP Select whether or not to use LDAP.
Value: Off, On
SNMP Select whether or not to communicate using SNMP.
*1
Value: Off, On
SNMPv3 Select whether or not to communicate using SNMPv3.
*1
Value: Off, On
HTTP Select whether or not to communicate using HTTP.
*1
Value: Off, On
HTTPS Select whether or not to communicate using HTTPS.
*1 *2
Value: Off, On
*2 Set "SSL" to [On] in "Secure Protocol".
Secure Protocol
(page 8-29)
IPP Select whether or not to receive documents using IPP. When selecting [On], set the IPP default
Port Number. Use the IPP default port 631.
*1 *2
Value: Off, On (Port Number: 1-32767)
IPP over SSL Select whether or not to use IPP over SSL.
Value: Off, On (Port Number: 1-32767)
NOTE
When selecting [On], the certificates must be installed.
Embedded Web Server RX User Guide
RAW Port Select whether or not to receive documents using RAW Port.
*1
Value: Off, On

Utax P-C3060 Specifications

General

Brand	Utax
Model	P-C3060
Category	All in One Printer
Language	English