8-32
Setup and Registration (System Menu) > System Menu
NW InterfaceSend
[System Menu/Counter] key > [ā²] [ā¼] key > [System/Network] > [OK] key > [ā²] [ā¼] key > [NW InterfaceSend] >
[OK] key
I/F Block Set.
[System Menu/Counter] key > [ā²] [ā¼] key > [System/Network] > [OK] key > [ā²] [ā¼] key > [I/F Block Set.] > [OK] key
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.
This function is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Item Description
NW InterfaceSend Specify the network interface card to be used for the send function, the network authentication
and connecting to external address book.
Value: Standard, Option NIC
Item Description
USB Host This locks and protects the USB port (USB host).
Value: Unblock, Block
USB Device This locks and protects the USB interface connector (USB Device).
Value: Unblock, Block
USB Storage This locks and protects the USB memory slot.
Value: Unblock, Block
This function is available when USB Host is set to [Unblock].
Option I/F 1
*1
*1 [Optional Interface] is displayed on P-C3065 MFP.
This locks and protects the optional interface slots.
Value: Unblock, Block
If the machine has two optional interface slots, you can set this feature for each slot.
Option I/F 2
*2
*2 Only on products with the fax function installed.
After changing the setting, restart the network or turn the machine OFF and then ON.
To Next Page
Loading...
Need help?
General
