UTC Fire and Security AirSense Stratos EX User Manual

Chapter 2: Product description
Stratos EX Hazardous Area Aspirating Smoke Detection System Installation Manual 15
Detector connections
Figure 4 below shows the detector connections.
Figure 4: Detector connections
(1) Normally closed FAULT relay contact
(2) Normally open FIRE relay contacts
(3) Loop data to fire panel (Not currently supported)
(4) RS-485 / SenseNET connections (See “Setting the device address” on page 29.)
(5) Power supply
(6) IDC 26 way connector for APIC card (not currently supported)
(7) Fire, Fault and OK display LED connections
(8) Aspirator drive connection
(9) Flow sensor connection
(10) RAM backup power jumper link

UTC Fire and Security AirSense Stratos EX Specifications

General

Brand	UTC Fire and Security
Model	AirSense Stratos EX
Category	Smoke Alarm
Language	English