EasyManua.ls Logo

UTICA BOILERS MAHF-165 - User Manual

UTICA BOILERS MAHF-165
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Manufactured by:
ECR International Inc.
2201 Dwyer Avenue, Utica, NY 13501
Tel. 800 253 7900
www.ecrinternational.com
MAHF-125, MAHF-165
MACF-15
0, MACF-205
CONDENSING
GAS FIRED BOILER

Table of Contents

Questions and Answers

  • A
    Adam SimpsonSep 23, 2025
    How to troubleshoot Domestic Hot Water NTC sensor fault in UTICA BOILERS MAHF-165?
    • S
      Sarah CookSep 23, 2025
      To address a Domestic Hot Water NTC sensor fault in your UTICA BOILERS Boiler, check the sensor and its cable.
  • E
    Elizabeth SnowAug 25, 2025
    What to do if my UTICA BOILERS Boiler is experiencing loss of flame?
    • T
      Tiffany WrightAug 25, 2025
      If you are experiencing a loss of flame in your UTICA BOILERS Boiler, you should first check the sensing electrode and its cable. Next, check for flue recirculation and ensure there's electrical continuity between the burner and the ground. Verify the gas pressure and gas orifice. You can also enable the automatic calibration function. If the issue continues, contact an authorized service center.
  • M
    monica88Aug 25, 2025
    How to increase hydraulic pressure in UTICA BOILERS MAHF-165 Boiler?
    • S
      Sara PerezAug 26, 2025
      If the hydraulic pressure in your UTICA BOILERS Boiler is too low, refill the heating system by opening the cold water tap.
  • A
    Andre DavisAug 27, 2025
    What causes high hydraulic pressure in UTICA BOILERS MAHF-165 Boiler and how to fix it?
    • C
      Clinton Boyle PhDAug 27, 2025
      If the hydraulic pressure in your UTICA BOILERS Boiler is too high, relieve the pressure via the relief valve or by draining some water. Also, make sure the water feed is operating correctly.
  • T
    thomaswrightAug 27, 2025
    How to fix a fan fault in UTICA BOILERS Boiler?
    • S
      Sheila MccormickAug 27, 2025
      If there's a fan fault in your UTICA BOILERS Boiler, check the fan and its cable for any issues.
  • A
    alex83Sep 13, 2025
    What causes low return water temperature in UTICA BOILERS Boiler?
    • M
      Melanie ManningSep 13, 2025
      If your UTICA BOILERS Boiler indicates a low return water temperature or the anti-freeze function is active, check the return water sensor, the circulator, and ensure correct water circulation. The boiler will exit this status when the condition is resolved.
  • J
    Joan Lindsey MDSep 12, 2025
    What to check if NTC flue sensor tripped due to over temperature in UTICA BOILERS MAHF-165?
    • S
      sethrichardsonSep 12, 2025
      If the NTC flue sensor has tripped due to over temperature in your UTICA BOILERS Boiler, check the thermostat and ensure correct circulation of water and pump. Also, check the status of the primary exchanger.
  • C
    Crystal RoweSep 12, 2025
    What causes a fault flame (parasitic flame) in UTICA BOILERS MAHF-165 Boiler?
    • M
      monicaparkerSep 12, 2025
      If there's a fault flame (parasitic flame) in your UTICA BOILERS Boiler, check the correct operation of the T. gas valve.
  • T
    Tammy JonesSep 4, 2025
    What causes a combustion test alarm during commissioning of UTICA BOILERS MAHF-165 Boiler?
    • E
      Eugene WagnerSep 4, 2025
      If you encounter a combustion test alarm during commissioning or calibration of your UTICA BOILERS Boiler, check the flame sensor, look for obstructions in the flue pipe, check for recirculation issues, and verify the gas pressure, gas orifice, and gas quality. Then, perform the calibration function.
  • V
    Valerie ThomasSep 2, 2025
    What does a pre-circulation alarm mean on UTICA BOILERS Boiler?
    • M
      Michael LewisSep 2, 2025
      If you're getting a pre-circulation alarm (temporary fault) on your UTICA BOILERS Boiler, verify the correct circulation of water and pump. Also, check that the supply and return wiring is correct.

Summary

Important Information & Safety

Safety Information

Essential safety guidelines for boiler installation and operation.

Important Safety Information

Crucial safety precautions and compliance requirements for installation.

Boiler Specifications and Components

Physical Data and Dimensions

Detailed physical dimensions and system specifications for all models.

Component Identification

Diagrams and lists identifying key boiler components for each model.

Installation Guidelines

Introduction and Installation Compliance

Overview of installation standards, regulations, and designated uses.

Boiler Location, Clearances, and Piping

Guidelines for boiler placement, clearances, combustion air, vent, hydronic, and gas piping.

Electrical Connections and Wiring

Requirements for boiler electrical wiring, grounding, and connections.

Near Boiler Piping Connections

Diagrams illustrating piping connections for various boiler configurations.

General Hydronic and Wiring Information

General guidelines for hydronic piping and electrical wiring compliance.

Start-Up and Operation

Initial Start-Up and Commissioning

Step-by-step guide for initial boiler start-up, de-aeration, calibration, and gas checks.

Boiler Operating Modes and Controls

Overview of control panel, operating modes, parameters, and safety features.

Maintenance and Troubleshooting

Routine Maintenance and Component Care

Procedures for seasonal checks, routine servicing, cleaning, and draining.

Troubleshooting and Error Resolution

Comprehensive guide to error codes, troubleshooting charts, and fault solution steps.

Technical Data and Diagrams

Technical Specifications and Ratings

Data on boiler performance, capacities, and altitude effects.

Piping, Wiring, and System Diagrams

Legends, diagrams for piping, wiring, low mass systems, and optional accessories.

UTICA BOILERS MAHF-165 Specifications

General IconGeneral
BrandUTICA BOILERS
ModelMAHF-165
CategoryBoiler
LanguageEnglish

Related product manuals