Utimaco Se Series - User Manual

CryptoServer LAN
Se-Series
Operating Manual

Summary

1 Introduction

1.1 About this Manual

Provides information about the manual's purpose and Utimaco IS GmbH's liability.

1.1.1 Target Audience for this Manual

Identifies system administrators as the intended audience for this manual.

1.1.2 Contents of this Manual

Outlines the manual's content, covering hardware and safety instructions.

1.1.3 Document Conventions

Explains conventions used in the manual for GUI elements, file names, and references.

1.2 Other Manuals

Lists related CryptoServer manuals and Quick Start Guides available for different series.

CryptoServer LAN - Quick Start Guide

Provides step-by-step instructions for bringing the CryptoServer LAN into service and administration.

CryptoServer PCle - Quick Start Guide

Offers guidance on installing the CryptoServer PCIe driver and using the command-line tool.

1.3 Import and Export Regulations

Details legal foreign trade regulations for exporting and importing the CryptoServer LAN.

1.4 Damage in Transit

Instructions for reporting and handling damage discovered upon arrival of the device.

1.5 Deliverables

Lists the items included with the CryptoServer LAN package.

2 General Safety Instructions

2.1 Moving and Storing

Provides instructions for safely moving and storing the CryptoServer LAN device.

2.2 Environmental Temperature

Specifies the required operating and storage temperature ranges for the device.

2.3 19 Rack

Details installation guidelines for mounting the CryptoServer LAN in a 19-inch rack.

2.4 Desktop

Provides recommendations for placing and operating the CryptoServer LAN on a flat surface.

2.5 Power Supply and Power Supply Cable

Covers safety precautions for connecting the power supply and handling the cable.

2.6 Opening the Device

Outlines procedures and warnings regarding opening the CryptoServer LAN device.

2.7 Batteries

Describes the two batteries within the CryptoServer LAN and their functions.

2.7.1 External Battery in the Battery Compartment

Details the 3.6V lithium battery located in the front compartment and its replacement.

2.7.2 Carrier Battery of the CryptoServer Se

Explains the 3V lithium battery powering the sensor and quenching circuit.

2.8 Cleaning

Provides instructions on how to safely clean the CryptoServer LAN device.

3 Bringing into Service

3.1 Ports and Interfaces on the Rear Face

Identifies and describes the ports and connectors located on the rear of the device.

3.2 Ports and Operating Elements on the Front Face

Details the ports, buttons, and indicators on the front panel of the device.

3.3 Connectors and Operating Elements in the Battery Compartment

Describes the components found within the device's battery compartment.

3.3.1 Menu Control Buttons

Explains the function of each button used for menu navigation and control.

3.4 Bringing the CryptoServer LAN into Service

Provides step-by-step instructions for setting up and operating the CryptoServer LAN.

4 Maintenance

4.1 Checking the Battery Status

Guides on how to check the power levels of the internal batteries.

4.2 Replacing the External Battery

Detailed steps for safely replacing the external battery in the device.

5 Switching off the CryptoServer LAN

6 Disposing of the CryptoServer LAN

7 Technical Data

8 Contact Address for Support Queries

Utimaco Se Series Specifications

General

Power Supply	Redundant power supplies
Security Certifications	FIPS 140-2 Level 3, Common Criteria EAL4+
Form Factor	Rack-mountable
Cryptographic Algorithms	RSA, ECC, AES, SHA, HMAC
Interfaces	Ethernet, USB, Serial
Memory	Up to 64GB RAM
Storage	SSD
Operating System	Linux-based