General Safety Instructions
2 General Safety Instructions
Please follow all the warnings, safety notes and instructions given on the device or in this
manual. If you fail to do so, Utimaco IS GmbH will not accept any liability for any resulting
damage caused.
The CryptoServer LAN includes a CryptoServer Se. If the predefined limit values for its internal
temperature are exceeded (or not reached), all the data on the CryptoServer Se will be deleted.
Before unpacking the device and bringing it into operation, please read the safety
instructions below carefully to ensure that the device can be operated safely.
Always keep these instructions handy, in a safe place.
2.1 Moving and Storing
When moving and storing the device, please follow these instructions:
■ Before moving CryptoServer LAN, ensure that the power supply cable has been pulled out
of the socket and that all other connection cables have been removed from the other
devices.
■ CryptoServer LAN should only be moved and stored in its original packaging.
■ You must make sure that CryptoServer LAN is always stored at temperatures between -
10°C and +55°C (+14°F to +131°F).
■ Do not subject the device to impacts and vibrations or any other physical events that may
damage the packaging.
■ If the device is to be stored for a longer time period, ensure that the battery replacement
time is not exceeded.
■ Keep this manual together with your CryptoServer LAN so that it is handy if you need to
reinstall the system.
2.2 Environmental Temperature
CryptoServer LAN must only be operated and stored in a particular temperature range.
■ You must make sure that CryptoServer LAN is always stored at temperatures between
-10 °C and +55 °C (+14 °F to +131 °F).
To Next Page
Loading...
