Need help?Do you have a question about the Utimaco CryptoServer LAN V4 and is the answer not in the manual?
Specifies the required operating and storage temperature ranges for the CryptoServer LAN and its components.
Explains the redundant power supplies and safe connection practices, including using separate circuits and checking voltage.
Emphasizes that only authorized personnel should open the device and details risks associated with unauthorized access.
Describes the two batteries (external and carrier) in the CryptoServer LAN that ensure data retention during power loss.
Details the external 3.6 V lithium battery, its function, lifespan, and replacement procedures.
Details the procedure and requirements for replacing the external battery in the CryptoServer LAN.
Describes how to safely remove or replace a power supply module (AC or DC) while the CryptoServer LAN is running.
Instructs users to delete all sensitive data from the CryptoServer LAN before disposing of the device.
General| Model | CryptoServer LAN V4 |
|---|---|
| Category | Hardware Security Module (HSM) |
| Type | Network-attached HSM |
| Compliance | FIPS 140-2 Level 3, Common Criteria EAL4+ |
| Weight | Approx. 8 kg (17.6 lbs) |
| Connectivity | Ethernet |
| Host Interface | Ethernet |
| Interfaces | USB |
| Cryptographic Algorithms | RSA, ECC, AES, SHA-2 |
| Key Management | secure key generation |
| Key Storage | Secure internal storage |
| Certifications | FIPS 140-2 Level 3, Common Criteria EAL4+ |
| Operating System | Proprietary OS |
| Power Supply | 100-240 VAC, 50-60 Hz |
| Form Factor | 19" Rackmount, 1U |
To Next Page
