General Safety Instructions
2 General Safety Instructions
Please follow all the warnings, safety notes and instructions given on the device or in this
manual. If you fail to do so, Utimaco will not accept any liability for any resulting damage
caused.
The CryptoServer LAN includes a CryptoServer CSe- or Se-Series Gen2. If the predefined limit
values for its internal temperature are exceeded (or not reached), an alarm will be triggered
and all the data on the CryptoServer will be deleted.
Before unpacking the device and bringing it into operation, please read the safety
instructions below carefully to ensure that the device can be operated safely.
Always keep these instructions handy, in a safe place.
2.1 Moving and Storing
When moving and storing the device, please follow these instructions:
■ Before moving the CryptoServer LAN, ensure that the power supply cables have been
pulled out of the sockets and that all other connection cables have been unplugged from
the other devices.
■ CryptoServer LAN should only be moved and stored in its original packaging.
■ You must make sure that CryptoServer LAN is always stored at temperatures between
-10 °C and +55 °C (+14 °F to +131 °F).
■ Do not subject the device to impacts and vibrations or any other physical events that may
damage the packaging.
■ If the device is to be stored for a longer time period, ensure that the battery replacement
time is not exceeded.
■ Keep this manual together with your CryptoServer LAN so that it is handy if you need to
reinstall the system.
To Next Page
Loading...