Uwatec Aladin 2G User Manual

10
2. System and operation
SCUBAPRO ALADIN 2G
Underwater dive mode (Algo):
• Access alternate displays
• Set bookmark
• Operate the backlight
• Activate the safety stop timer (dive mode only,
in depths < 6.5m / 20ft)
Gauge mode (stopwatch):
• Restart
Diving with two mixtures:
• Initiate switch to gasd or gas 1
• Interrupt switching process
• Confirm switch to gasd or gas 1
2.2.2 Water contacts
On submerging in water the water contacts
switch on Aladin 2G automatically.
WARNING
If you have chosen the option “Water contacts
off” (“set 1”, ->58), Aladin 2G will turn on with
a delay of up to 1 minute into the dive. This
will affect functioning of the computer. Make
sure that the computer is on before starting
the dive.
2.2.3 SmartTRAK
With SmartTRAK you can configure
Aladin 2G, transfer dive data to a personal
computer and graphically display the
data. To start the communication, turn on
Aladin 2G and place it so that its infrared
port is in front of the infrared interface. If
Aladin 2G detects an infrared device within
range
appears.
Configuring Aladin 2G
To configure Aladin 2G, select “Dive
Computer Settings” under “OPTIONS”
on the main menu bar of SmartTRAK
after having established communication
between your PC and Aladin 2G. The
following window will appear:

Uwatec Aladin 2G Specifications

General

Brand	Uwatec
Model	Aladin 2G
Category	Diving Instrument
Language	English