5.4 Apnea menu
With the Apnea menu or LogTRAK you can
congure the following items:
Setting Range Default
Total Session
Depth
100..1000m, off off
SIF (Surface
Interval Factor)
5..20, off off
Dual Depth
Alarm
5-100m, 5-100m,
on/off
off
Depth
Incremental
Alarm
5-100m, dn(down)/
up/ bth(both)/off
off
Dive Interval
Alarm
15s-10min, on/off off
Surface Interval
Alarm
15s-10min, on/off off
Ascent Speed
Alarm
0.1-5 m/s (1-15
ft/s), on/off
off
1. Starting from the dive display, press-
and-hold the right button, then push the
right button until “APNEA” appears.
2. Conrm that you wish to enter the
apnea menu with a press-and-hold of
the right button.
3. Once entered you can scroll through
the menu by pressing the left or right
button.
5.4.1 Setting the total session
depth
You can set a total session depth
(cumulative value) with this alarm.
1. Conrm that you wish to change the
settings of the total session depth
alarm with a press-and-hold of the right
button.
“Off” or the selected value starts to
ash.
2. Scroll through the values by pressing
the left or right button.
3. Conrm the selected value increment
with a press-and-hold of the right
button.